Rubisync Hardware

• Arduino Pro Mini: an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language.
  • Details at arduino.cc
  • Power: 25 mA @ 3.3 VDC (est.)

• MicroMag 3-Axis Magnetometer: Low noise, large resolution magnetic field sensing, stable over a wide temperature range.
  • MicroMag3 Data Sheet
  • Wiring Example
  • Power: < 500 µA at 3 VDC (typ), 5.25 VDC (max)

• IMU 6DOF Razor: The 6DOF Razor makes use of ST's LPR530AL (pitch and roll) and LY530ALH (yaw) gyros, as well as the popular ADXL335 triple-axis accelerometer, to give you six degrees of measurement on a single, flat board.
  • Schematic
  • Eagle Files
  • LPR530AL Datasheet
    • Power: 2.7 V to 3.6 V; 6.8 mA (typ)
  • LY530ALH Datasheet
    • Power: 2.7 V to 3.6 V; 5 mA (typ), 5.5 mA (max)
  • ADXL335 Datasheet
    • Power: 1.8 V to 3.6 V; 350 μA @ 3 V (typical)

• Venus634FLPx: This is a development board that uses the smallest, most powerful, and most versatile GPS receiver we carry, the Venus. The module can be configured to an amazingly powerful 10Hz update rate, with 14 channel tracking!
  • Datasheet
  • Binary Command Set
    • Power: 2.8 V ~ 3.6 V; 28mA

• WiFly GSX 802.11b/g Serial Module: a complete ultra low power embedded TCP/IP solution. The WiFly GSX module is a stand alone, embedded wireless 802.11b/g networking module. The combination of ultra low power and the ability to wake up, connect to a wireless network, send data and return to sleep mode in less than 100 milliseconds, allows the WiFly GSX to run for years on two standard AAA batteries. Using only 100mWatts when awake and 10uWatts when asleep, this remarkable power efficiency makes possible a new class of internet enabled products.
  • Datasheet
  • Reference Guide
    • Power: 3.0 (min) 3.3 (typ) 3.7 VDC (max) ; 4uA sleep, 40mA Rx, 210mA Tx (max)

See Also

• Rubisync
• Rubisync Technical Information
• GEM Advanced Magnetometers